EDITOR: | April 7th, 2015

Alabama Graphite Receives Positive Assay Results from Trenching at its Bama Mine Project in Alabama, USA

| April 07, 2015 | No Comments
image_pdfimage_print

Alabama-Graphite-200x125April 7, 2015 (Source: Marketwired) — Alabama Graphite Corp. (“Alabama Graphite” or the “Company”) (TSX VENTURE:ALP)(OTCQX:ABGPF)(FRANKFURT:1AG)(WKN:A1J35M)(ISIN# CA0102931080) is pleased to announce that it has received final assay results from a trenching program conducted at its Bama Mine Project in early 2015. The results identified new targets in close proximity to the historic Bama Mine with a number of sections averaging over 3% C(g).

The purpose of the trenching was both to further evaluate areas adjacent to the historic mine as well as to test new areas where airborne geophysical anomalies and/or surface channel sampling has identified prospective targets. Bulk samples were also collected for future metallurgical testing.

Trenching has proven to be the most cost-effective means of exploration given the soft and near-surface nature of the graphite mineralization in Alabama. Trenching was performed by a contractor using an excavator with all sampling and logging being conducted by Alabama Graphite personnel. Assay work was conducted by ActLabs of Ancaster, Ontario. Samples were collected on five-foot intervals with the majority of the trenches cut perpendicular to the strike of foliation. In keeping with the Company’s environmental commitment, trenches are backfilled and reclaimed after sampling.

Significant results of trenches is presented in the table below:

Trench ID Length Key Interval Width Average % C(g)
AGC-CH-TR01a 125′ NSV NSV NSV
AGC-CH-TR01b 415′ 180-225′ 45′ 2.61
AGC-CH-TR02 885′ 195-225′ 30′ 2.55
AGC-CH-TR03a 175′ 55-105′ 50′ 2.98
AGC-CH-TR03b 725′ 125-185′ 60′ 2.54
AGC-CH-TR04 675′ 230-310′ 90′ 3.20
595-575′ 80′ 3.84
AGC-CH-TR05a 470′ 205-270′ 65′ 3.26
400-470′ 70′ 3.38
AGC-CH-TR05b 725′ NSV NSV NSV
AGC-CH-TR06 500′ 0-85′ 85′ 2.68
AGC-14-TR07a 600′ 0-220′ 220′ 3.01
AGC-14-TR07b 150′ NSV NSV NSV
AGC-CH-TR08 650′ 120-225′ 105′ 3.49
370-455′ 85′ 3.90
AGC-14-TR09a 425′ 320-425′ 105′ 3.23
AGC-14-TR09b 750′ 335-420′ 85′ 2.83
640-750′ 110′ 2.72
AGC-14-TR10a 400′ 70-355′ 285′ 3.05
AGC-14-TR10b 350′ 240-310′ 70′ 2.88
AGC-14-TR11a 125′ NSV NSV NSV
AGC-14-TR11b 375′ 0-70′ 70′ 3.20
AGC-14-TR12 170′ NSV NSV NSV
AGC-14-TR13 75′ NSV NSV NSV
AGC-14-TR14 125′ 10-110′ 100′ 3.69

NSV = No Significant Values

“We emphasize that all of the results presented are from soft, oxidized material which differentiates the Alabama graphite deposits relative to other flake graphite occurrences in North America. The Bama Mine is of significant interest as both historical records and our own metallurgical testing indicates a very high proportion of coarse flake graphite,” states Ron Roda, President and CEO of Alabama Graphite. “Our test results suggest that there is the potential to develop another resource in close proximity to the former mine.

The Company is preparing composite samples for metallurgical testing from some of the key trench intercepts as the next step in the exploration process for the Bama Mine Project.

Rick Keevil, P. Geo., a Director of the Company and VP of Project Development, is a Qualified Person as defined by National Instrument 43-101, has reviewed the contents of this press release.

About Alabama Graphite

Alabama Graphite Corp.’s mission is to become one of the greenest graphite producers in the world. The Company, through its wholly-owned subsidiary, Alabama Graphite Company Inc., is conducting exploration and development both at its flagship Coosa Graphite Project in Coosa County, Alabama, USA and the recently acquired Bama project in Chilton County, Alabama, USA. These two advanced-stage projects are 100% owned by Alabama Graphite and are on private land. The two projects encompass over 43,000 acres and are located in an area with significant historical production of crystalline flake graphite. The Company has the largest NI 43-101 indicated flake graphite resource in the United States based on drilling 0.18 square miles (0.3% of the total acreage). The Alabama deposits are unique in that a significant portion of the graphite-bearing material is oxidized and has been broken down into an extremely soft rock. Both projects have in place critical infrastructure, are within close proximity to transportation routes and enjoy a hospitable climate allowing for year-round production and delivery. For further information and updates on the Company, please visit www.alabamagraphite.com.

Disclaimer for Forward-Looking Information

This press release contains forward-looking information under applicable Canadian securities laws (“forward-looking statements”) that are based on the beliefs of management and reflect Alabama Graphite Corp.’s current expectations. When used in this press release, the words “estimate”, “project”, “belief”, “anticipate”, “intend”, “expect”, “plan”, “predict”, “may” or “should” and the negative of these words or such variations thereon or comparable terminology are intended to identify forward-looking statements. Such statements reflect the current view of Alabama Graphite Corp. with respect to risks and uncertainties that may cause actual results to differ materially from those contemplated in those forward-looking statements.

By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors include, among other things, the interpretation and actual results of current exploration activities; changes in project parameters as plans continue to be refined; future prices of graphite; possible variations in grade or recovery rates; failure of equipment or processes to operate as anticipated; the failure of contracted parties to perform; labour disputes and other risks of the mining industry; delays in obtaining governmental approvals or financing or in the completion of exploration, as well as those factors disclosed in the Company’s publicly filed documents. Forward-looking statements are also based on a number of assumptions, including that contracted parties provide goods and/or services on the agreed timeframes, that equipment necessary for exploration is available as scheduled and does not incur unforeseen breakdowns, that no labour shortages or delays are incurred, that plant and equipment function as specified, that no unusual geological or technical problems occur, and that laboratory and other related services are available and perform as contracted.

Forward-looking statements are made based on management’s beliefs, estimates and opinions on the date that statements are made and Alabama Graphite Corp. undertakes no obligation to update forward-looking statements (unless required by law) if these beliefs, estimates and opinions or other circumstances should change. Investors are cautioned against attributing undue certainty to forward-looking statements.

Alabama Graphite Corp. cautions that the foregoing list of material factors and assumptions are not exhaustive. When relying on Alabama Graphite Corp. forward-looking statements to make decisions, investors and others should carefully consider the foregoing factors and assumptions and other uncertainties and potential events. Alabama Graphite Corp. has also assumed that the material factors and assumptions will not cause any forward-looking statements to differ materially from actual results or events. However, the list of these factors and assumptions is not exhaustive and is subject to change and there can be no assurance that such assumptions will reflect the actual outcome of such items or factors.

NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICE PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THE CONTENT OF THIS NEWS RELEASE.


Raj Shah

Editor:

Raj Shah has professional experience working for over a half a dozen years at financial firms such as Merrill Lynch and First Allied Securities Inc., ... <Read more about Raj Shah>


Copyright © 2017 InvestorIntel Corp. All rights reserved. More & Disclaimer »


Leave a Reply

Your email address will not be published. Required fields are marked *