EDITOR: | November 24th, 2014 | 2 Comments

Lifton on coining ‘Technology Metals’

| November 24, 2014 | 2 Comments

 Technology-MetalsTechnology Metals Monday — Starting today, I will on every Monday, review the highlights of the previous week in technology “metals and materials” for those investors, both small and institutional, who wish to know what is affecting the future demand growth for such metals and materials.

Technology Metals and Materials are the chemical elements (metals and metalloids: metal-like elements, and their alloys and compounds), the electronic properties of which enable technologies to be mass produced. Thus “Technology Metals” are critical for the lifestyle of contemporary industrialized societies and the desire for such a lifestyle is the true driver for future global demand growth for technology metals

The reader may think that I am being far too precise and therefore constricting in the above definitions, but I believe that the provision of and the securing of food, shelter, health, and safety are the only reasons that society in general and the division of labor in particular came into existence. The democratization of society and most importantly the growth of a stable middle economic class is the key driver for the spread of consumer versions of technology that deliver anything beyond food, shelter, health, and safety.

I originated the use of the term “technology metals” in 2007 when I thought I needed a category term to describe those rare metals that were not used structurally (i.e., they could not be used to support weight or resist deformation without losing their properties) or useful in making tools (they could not hold an edge or be sharpened). Thus until the advent of a distributed and regular affordable supply of electricity (1880s) and an understanding of alloy chemistry (1900- ) rare metals were at best decorative and thus either monetized (gold and silver) or unknown. The scientific revolution of the 19th century driven by the recognition of a structure within matter (atoms and molecules) and then by the careful taking of data and the recognition of patterns inherent in the data led to the advent and then the rapid development of scientific chemistry and then of scientific metallurgy.

I did not originally include as a technology metal Copper, probably the first metal discovered by man, and I did not in 2007 see that copper became the first and still is today the core technology metal,. This is because it is the cheapest way to distribute electricity. Copper was thus the first, and remains the most important of the, technology metals.

The key technology metals can be listed in many ways. In 2007 I listed them by the technologies they enabled:

  • Energy production, storage and distribution: Uranium, Zirconium, Hafnium, Uranium, Molybdenum, Cobalt, Nickel, Beryllium, Neodymium, Praseodymium, Dysprosium, Terbium, Scandium, Lithium, Sulfur, selenium, tellurium, cadmium
  • Communication: Silicon, germanium, gallium, indium, arsenic, antimony, neodymium, praseodymium, dysprosium,
  • Information management: Silicon, germanium, gallium, arsenic, antimony, phosphorous, carbon (as graphene and graphite)
  • Entertainment: Indium, yttrium, europium, terbium
  • Transportation: Chromium, manganese, tungsten, molybdenum, yttrium, zirconium, nickel, cobalt,
  • Infrastructure: Niobium, Chromium, Manganese, Cobalt, Nickel, Tungsten, Molybdenum, Vanadium
  • Chemical reactions, Catalysts: Platinum, Palladium, Ruthenium, Rhodium, Molybdenum, Silver, Cerium, Lanthanum
  • Health: Heavy Rare Earths, Platinum group metals, Thallium, Phosphorous
  • Security: Uranium, Tungsten, Molybdenum, Chromium, Nickel, Cobalt, the Rare Earths,

Most of the rare key technology metals appear several times in the above technology categories. Nearly all of them are scarce, or only found as by-products of “base” metals production, and, even in that case, are difficult to extract and/or separate and refine to the high purities needed for technological application.

Therefore the world of technology metals supply has entered into a new phase. Exploration for additional supplies of minerals from which rare technology metals may be extracted is no longer necessary. What is now critical is the development first of extraction technologies to recover the rare technology metals from their ores, and simultaneously the application of known technologies for separating and purifying more common metals and materials to the problems inherent in separating and purifying rare technology metals. Second is the development of new separation and purification technologies for use with the rare technology metals.

In all cases, extraction, separation, and purification existing and new technologies for each must be economical and practical. Laboratory demonstrations must be followed by scale-up to pilot plants before any investor can be asked to commit to the construction of a full scale facility.

The current rare earth boom-let began as a pure exploration play in 2007 with all participants assuming that if a mixed concentrate of the rare earths of any distribution of proportions could be produced then “they” would buy it and refine it by “traditional” methods. This has turned out not to be, and it never was, the case.

Just a few of the exploration companies have survived with a business model revised to take into consideration just how far along the supply chain the processing of rare earths must go to achieve a profitable product line for sale. Even fewer of those have managed to achieve a clean (radiation free, interfering ion free) mixed concentrate process-able by the “traditional” method of solvent extraction as practiced today in China, France, Japan, Malaysia, and California into individual rare earth salts of commercially high purity.

There are now perhaps four new rare earth separation/purification technologies at the bench scale level in test. Two of the four have been applied at scale to the separation and purification of other rare technology metals. Both of these will now be tried at the pilot plant scale in 2015. The remaining two technologies have never been tried at pilot plant scale but show great promise.

I will be reporting on this latest phase, the processing phase, of the development of supplies of individual separated rare earths as well as on similar situations and developments in the lithium, platinum group metals, and graphite spaces.

Demand will not create new supplies unless both existing and new process technologies can be brought to bear on the minerals we know.

It is innovation that must be supplied as well as money.

The need for such innovation has already seen the birth of many new specialist processing companies in the USA and Europe.

Next week I’ll tell you about the ones looking at the rare earths.


Jack Lifton is the CEO of Jack Lifton, LLC and is a consultant, author, and lecturer on the market fundamentals of technology metals. “Technology metals” ... <Read more about Jack Lifton>

Copyright © 2021 InvestorIntel Corp. All rights reserved. More & Disclaimer »


  • Tracy Weslosky

    I remember when Jack was explaining the term “Technology Metals” to me when we toured the Ucore property together several years ago…

    It was perfect.

    Prior to this, we were calling them critical metals, critical materials, strategic metals, strategic materials….I was relieved to have a term that I could get my head around as a writer. But not as relieved as I am to know that Jack will be writing a weekly column that I can count on with my Monday AM coffee.

    Hope you enjoy as much as I do. Thank you Jack — we love you on InvestorIntel.

    November 24, 2014 - 12:11 PM

  • Yves1

    Hi Jack.
    You do not mention Lanthanum in the Energy section. Oversight or Freudian slip?
    I am not sure that producers or users of NiMH batteries (BASF, Toyota, Honda…) would agre with you. We could also mention its usage as a catalyst in Solid Oxide Fuel Cells…
    Good to read you as always.

    December 2, 2014 - 10:02 PM

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.