EDITOR: | December 10th, 2021 | 7 Comments

General Motors engages with MP and Germany’s Vakuumschmelze for Rare Earth Permanent Magnets

| December 10, 2021 | 7 Comments
image_pdfimage_print

General Motors (NYSE: GM), has announced supplier agreements with both U.S. Based, MP Materials Corp. (NYSE: MP), and with Germany’s Vacuumschmelze (VAC). This is very significant news, I think, because it means that GM will engage to support (financially, most likely,) Germany’s Vacuumschmelze to enter the U.S. market and to expand its existing sintered rare earth permanent magnet (REPM) production by adding (unspecified) capacity in the USA. It’s unlikely that VAC will drop any German (EU) customers, so to supply GM, it will add U.S. capacity. VAC says that it will add that capacity and begin U.S. production of REPMs for GM by 2024. America’s MP Materials is also to be engaged by GM as a REPM supplier, and I suspect, as a future supplier to VAC of NdPr metal as raw material for VAC domestic American REPM production for GM. The UK’s Less Common Metals (LCM) is the only non-Chinese (perhaps also non-Japanese) supplier to VAC of rare earth metals now, but LCM can only produce 120 tpa of Nd metal at this time, and thus can support only 400 tpa of domestically produced (in the UK or EU) REPMs of the sintered Neodymium-iron-boron (NdFeB) type. LCM’s customer is VAC, whose customer for REPMs is most likely Daimler, for its (Daimler’s) in house electric motor production (in Germany now but to be expanded to the UK).

I think it very likely that Daimler is supporting VAC to also expand its capacity, in Europe, for its needs for sintered REPMs of the NdFeB type. Daimler and VAC also need to find additional Nd metal supplies for VAC in Europe. I won’t be surprised if LCM is bought by Daimler or financed by Daimler to expand its rare earth metals production capacity.

No OEM car maker wants to single-source a critical production part, so that this announcement doesn’t mean that GM is going to rely on just VAC or MP Materials for REPMs. It’s not unusual that GM will support MP Materials also at the same time as VAC to ensure that it has a principal supplier and at least one second source. This has long been the automotive industry’s standard sourcing procedure. In this case, the experienced and existing VAC is to be the principal supplier, and MP Materials will be a second source.

I suspect additional future suppliers of REPMs chosen by GM are undergoing due diligence right now.

VAC is really the Western World’s (outside of Japan) largest, perhaps only, OEM of REPMs for automotive production use. It is thus the only choice currently for a non-Chinese Western OEM automaker who wants “domestic” REPMs. But its capacity, currently only in Europe, is probably sold out to EU-based OEMs. This is the reason that to expand into the domestic American market it needs to add capacity, and this is the reason that GM is “supporting” VAC in building an REPM plant in the USA dedicated to the supply of GM. Magnet makers can only make magnets if they have secure supplies of raw materials, at competitive prices, and dedicated customers who will pay for finished goods by an indexed (to raw material costs) price. This is NOT the traditional pricing agenda in the OEM automotive industry. Fixed prices over the life of the contract are standard, and, in fact, the wild ride of neodymium prices in the last year has made REPM manufacturing for the OEM automotive parts industry a nightmare for those with the traditional fixed-price-for-the-life-of-the-contracts with OEM automotive. It’s very unlikely that VAC would commit to building a (just-in-time[?]) U.S. plant for a customer without financial assistance and guarantees and an indexed price. I hope that both GM and VAC will let us know if GM has “broken” protocol. This will have a lot to do with achieving any government subsidies for domestic REPM manufacturing.

Now for the bad news. A typical GM EV using the Ultium(TM) platform power train (a lithium-ion battery and an electric motor), if it uses a REPM based motor (REPMM) will need between 2.5 and 5 kg of NdFeB magnets. A 1000 tpa REPM facility can thus supply the needs for REPMMs of between 200,000 and 400,000 new cars. GM has consistently been making about 3,000,000 cars and trucks per year in the USA (forget 2020. It’s an outlier). So, to convert its domestic production to EVs entirely GM would need a maximum of 10,000 tpa of sintered NdFeB, REPMs. There is today no domestic REPM production capacity in North America. It will take a long time, if it even ever can be done, to achieve such a REPM capacity in the USA. But even if it is possible, it would only be possible with guaranteed pricing for the feedstock raw materials (separated rare earths, rare earth metals, and magnet alloys), and a guaranteed competitive REPM price for a break-even capacity.) This is not just a monumental supply chain cost management problem; it is a complete break with legacy OEM Automotive sourcing cost structure management, because it makes REPM and REPMM costs unpredictable!

In my opinion, GM is not solving the domestic REPM supply chain problem; it is addressing it, rather than just talking about it as politicians are wont to do. GM is putting its money where its mouth is.

But, GM is not the only OEM car maker that produces or sells products into North America’s nearly 20 million unit per year market. Total conversion of that market to EVs that use REPMMs would need 60,000+ tpa of REPMs annually. Europe’s car market is larger than North America’s, and China’s domestic market is larger than Europe’s. Today, China alone has the existing capacity in REPMs, REPMMs, and Lithium to transform its domestic car market production entirely to EVs, and it has announced that it will reach 20% of that goal by 2025 and 40% by 2030.

Projections of near-term EV production proportions for the American and European markets are wildly unrealistic, just based on the necessary critical raw materials and components capacity needed to achieve those goals. The build-out of the non-Chinese EV industry is just beginning in the West, and I think a long steep, very expensive, learning curve is ahead of us. I’m going to begin to address the critical raw material dilemma for EVs next week.


Editor:

Jack Lifton is the CEO of Jack Lifton, LLC and is a consultant, author, and lecturer on the market fundamentals of technology metals. “Technology metals” ... <Read more about Jack Lifton>


Copyright © 2022 InvestorIntel Corp. All rights reserved. More & Disclaimer »


Comments

  • Dan

    I very much appreciate your well grounded reality based analysis

    December 10, 2021 - 3:44 PM

    • Jack Lifton

      Thank you

      December 10, 2021 - 3:59 PM

  • 38BWD22

    Even though GM and MP Materials (and VAC) are only solving part of our many problems re rare earth supplies, at least it’s a start. It looks like all or almost all of the various other plans out there (Lynas & their US plans, USA Rare Earth & their plans, Neo Materials & their plans, the smaller Canadian players, etc.) need to get production of the oxides and magnets. There are more active players now than before, but without a high percentage of them succeeding, it looks like either:

    — China will continue to dominate the industry at our expense

    or

    — we will wind up using less REs and/or wind up using other (lesser) technologies

    Jack’s analyses have always seemed to me to be well-founded. Advancing all of these segments of green technologies will be difficult and expensive.

    * * *

    The other thing I wonder about re MP and GM is whether or not REs like Dysprosium and Terbium will be needed in quantity for those REPMs and other magnets…. MP produces very little those, and apparently the heavier rare earths are very scarce. Maybe there are substitutes for Dy and Tb?

    Thank you for your informative articles.

    December 10, 2021 - 7:47 PM

  • maplelegion

    G’day from Australia , Jack .Topical to your article , and your intended follow up , would be for you to re-visit your interview on the 29th July 2020 with David Woodall of ASX:ASM Australian Strategic Materials . ASM has rapidly advanced its clean production of oxides to metals in several magnet metals/Titanium/Hafnium at Pilot Plant stage since your interview , and the full Commercial Plant Construction initially planned at 5200 tpa in now well advanced and partially operational , scheduled for ramp up in the 2nd half of 2022 . Well worth you talking to David Woodall or Ian Chalmers again, or brushing up on activities by visiting recent ASX company announcements .Keep up the good work with your reporting . Cheers

    December 11, 2021 - 7:12 PM

    • Jack Lifton

      Maplelegion
      I would like to speak with David and/or Ian. The non -Chinese critical metals’ supply chain space is very active, and I think that ASM is at the forefront of Australian ventures in that space. The issue is and will be “processing,” not mining, and it looks like ASM is a winner.

      Jack

      December 11, 2021 - 11:17 PM

  • maplelegion

    Link to interview with Jack Lifton and David Woodall
    https://www.youtube.com/watch?v=KAeV6hfrsVc

    December 11, 2021 - 7:34 PM

  • paul ward

    Hi

    I would like to purchase your product

    Do you allow pick up via courier company for freight forwarders

    What types of credit card do you accept?

    Awaiting your response

    Regard
    paul ward
    CEO
    wardconnectinc Inc
    525 Av. Franklin Delano Roosevelt,
    San Juan, 00918, Puerto Rico USA
    (254)-275-4476-Mobile/Whatsapp

    December 18, 2021 - 2:38 AM

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.